A20CD online Conductivity Controller is an industrial grade water quality analysis device that combines high performance and high adaptability, integrating conductivity, resistivity TDS、 The synchronous measurement function of the five core parameters of salinity and temperature, with the advantages of dual installation mode, strong anti-interference, and flexible output, has become a reliable choice for continuous water quality monitoring in industries such as urban sewage treatment, water supply, and chemical industry. The device is easy to operate, stable in operation, and can accurately capture changes in water quality, providing efficient data support for industrial production and water quality control.
★★★★★
Features
Specifications
| Parameter Category | Specific Specifications |
|---|---|
| Measurement Range | Conductivity: 0.05μS/cm ~ 200mS/cm |
| Resistivity: 0.00MΩ·cm ~ 20.00MΩ·cm | |
| TDS: 0 ~ 9999ppm | |
| Salinity: 0 ~ 10ppt | |
| Temperature: 0 ~ 100℃ | |
| Measurement Accuracy | ±2%FS |
| Measurement Resolution | Conductivity: 0.01μS/cm |
| Temperature Compensation | 0 ~ 100℃, supports three modes: PT1000 automatic compensation, NTC10K automatic compensation, manual compensation |
| Signal Output | Standard: 1 group of 4-20mA isolated output (corresponding to conductivity/resistivity and temperature respectively); Optional: 2 groups of 4-20mA output or RS485 communication; Maximum load 500Ω |
| Alarm Output | 2 groups of normally open contact relays, supporting high/low point alarm, hysteresis adjustable; Withstand voltage 250VAC, maximum current 3A |
| Power Supply | AC220V or DC24V |
| Power Consumption | ≤5W |
| Environmental Conditions | Operating temperature: 0 ~ 60℃; Relative humidity: ≤85%RH |
| Overall Dimensions | 144×144×115mm (Height × Width × Depth) |
| Mounting Cutout Dimensions | 138×138mm (Height × Width) |
Standard Configuration
- Host:A20CD conductivity controller
- Conductive electrode:KS1-5M-NTC
Core Highlights
- Dual installation mode flexible adaptation: supports panel installation and wall mounted installation. Panel installation requires a reserved 138 × 138mm hole, while wall mounted installation is fixed with 4 M5 screws to adapt to different installation environments.
- Multi mode temperature compensation and anti-interference: Supports PT1000, NTC10K automatic temperature compensation and manual compensation, 4-20mA output adopts isolation technology, strong anti-interference ability, and maximum load of 500 Ω.
- lexible output and alarm control: comes standard with a set of 4-20mA outputs, and two sets of outputs or RS485 communication can be selected as needed; Two sets of relays support multiple alarm modes such as high and low points, within/outside the interval, etc. The hysteresis can be freely adjusted to avoid frequent on-off.
- Convenient operation and security protection: supports switching between Chinese and English interfaces, clear menu prompts, and password management function to prevent non professionals from accidentally operating; The electrode signal transmission adopts dedicated coaxial cables, independent wiring to avoid interference, and the equipment is adapted to complex industrial environments.
Featured Applications

- For safety reasons, check the electrical resistivity (TDS) of both tap water and industrial pure water. This will also make sure that the water source is safe and that the pure water meets production standards.
- In the chemical production industry, it’s important to keep an eye on the conductivity and salinity of reaction liquids and circulating water in real time. Process parameters must also be controlled, and water quality issues must be avoided at all costs so that the product or equipment doesn’t suffer.
- Keeping an eye on industry processes: Good for keeping an eye on the quality of water in fields like power, electroplating, and medicines, and for helping to oversee the manufacturing process by giving information.
- Environmental monitoring: Always checking the salinity and conductivity of public water and industrial waste to help find pollution sources and get a sense of how bad the environment is.
Installation and operation points
- You can put the unit on a panel with a 138x138mm hole or on the wall using four M5 screws. Keep it out of places with high or low temperatures, a lot of moisture, or rust.
- There should be no bubbles in the water around the electrode, and it should be facing the flow of water. The wires should also be away from power lines.
- When you change the electrode coefficient, use a standard solution, like 1413μS/cm, to measure.
- You can choose how loud the alarms are and what the 4-20mA range is. Clean the electrode often with water that has already been cleaned.
Technical Support
Top 6 Industrial Gas Analyzers Manufacturers 2025
6 Best Industrial Gas Detector Manufacturers in the World
9 Best Portable Carbon Dioxide Detector 2025 – Complete Buying Guide
Top 7 portable combustion analyzer Tested
The A20CD online Conductivity Controller is a great choice if you need an industrial water quality online tracking device that is easy to set up, works reliably, and gives you accurate readings. It can measure five main parameters at once, such as conductivity, resistivity, TDS, and more. It can also be used in a variety of installation situations and is simple to run and keep up. It works well for businesses like treating sewage, providing water, and making chemicals.
We also provide original matching electrodes, standard calibration solutions and other products, as well as professional installation guidance and technical support, so that you can buy with confidence and use with ease. If you have customization needs or want to learn more details, feel free to contact us at any time to help you efficiently solve water quality monitoring problems!
Request a Quote
.png)






